Outdoor panels eliminate the need for two different products or finishes in the interior and exterior areas of a commercial building. Outdoor panels use the same manufacturing process as our STONEWORKS® panels, so the finish can be continuous. Our outdoor panels offer industry-leading strength and durability. Designed with a sheet of e-coated steel laminated to the bottom of the panel and tested to CISCA access floor criteria, Tate's outdoor panels supply a long-lasting exterior finish.
Design loads of 750 lbs with a safety factor of 2.0.Non-combustible panel.Factory-laminated, G90 hot-dipped galvanized steel bottom sheet with an epoxy painted finish for corrosion resistance.Meets Tate Standards per CISCA testing methods.Straight wall with beveled top edges.System Performance Criteria (Tested on Actual Understructure*)
| System Type | System Weight (lbs/ft2) |
Static Loads | Rolling Loads | Impact Loads |
Uniform Load |
||||
|---|---|---|---|---|---|---|---|---|---|
| Panel | Understructure | Design Loads1 |
Minimum Ultimate Loads |
Safety Factor2 |
10 Passes |
10,000 Passes |
|||
| SW Outdoor Panel |
Bison Exterior Pedestals |
14.3 lbs/ft2 | 750 lbs | 1500 lbs | 2.0 | 600 lbs | 450 lbs | 50 lbs | 350 lbs/sqft |
*All tests are performed using CISCA's Recommended Test Procedures for Access Floors with the exception of Design Load
1. System Design Load is based on permanent set ≤ 0.010” and is verified by loading panels in accordance with the CISCA concentrated load method but with panels installed on actual understructure instead of steel blocks. (Testing on blocks does not represent performance of an actual installation.) Ultimate, Rolling, and Impact Load tests are performed using CISCA Test Procedures.
2. Safety Factor is Ultimate Load divided by Design Load.
SAFS is an approved Victorian distributor for Tate access flooring systems. We work on projects ranging from $2 000 and a few days’ work to $2 000 000 work carried out over several months.
