The Posilock understructure system provides self-engagement and positioning of the raised floor panels without the need for stringers.
Provides self-engagement and positioning of floor panels.Self-capturing fastener remains within the panel and will not get lost.Steel pedestal head provides maximum strength.Pedestal nut provides anti-vibration and locking features.Seismic force-resistant pedestals are available that limit or eliminate the need for special bracing.Typical floor heights from 5”-24”; low finished floor heights (LFFH) available from 2.5"-4".System Performance Criteria (Tested on Actual Understructure*)
| System Type | System Weight (lbs/ft2) |
Static Loads | Rolling Loads | Impact Loads |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Panel | Understructure | Design Loads1 |
Minimum Ultimate Loads |
Safety Factor (min 2.0)2 |
10 Passes |
10,000 Passes |
||||
| ConCore 800 | Cornerlock | 48 kg/m2 | 3.5 kN | 8.8 kN | PASS | 3.5 kN | 2.5 kN | 0.6 kN | ||
*All tests are performed using CISCA's Recommended Test Procedures for Access Floors with the exception of Design Load
1. System Design Load is based on permanent set ≤ 0.010” and is verified by loading panels in accordance with the CISCA concentrated load method but with panels installed on actual understructure instead of steel blocks. (Testing on blocks does not represent performance of an actual installation.) Ultimate, Rolling, and Impact Load tests are performed using CISCA Test Procedures.
2. Safety Factor is Ultimate Load divided by Design Load.
SAFS is an approved Victorian distributor for Tate access flooring systems. We work on projects ranging from $2 000 and a few days’ work to $2 000 000 work carried out over several months.
