Kingspan RHG600 Simploc is a heavy-grade access floor system, capable of handling up to a 12kN/m2 uniformly distributed load. An RHG600 Simploc system is designed for heavy office use, computer, print and mechanical rooms with heavy equipment.
X
The oversize version of these panels must be screw-fixed to the pedestals using 4 M6 x 45mm Simploc screws through the pre-drilled & countersunk holes.
For perimeter detail using oversize panels, please refer to drawing SD19002. Please get in touch with the Kingspan Data & Flooring technical team for a copy, or for any further advice.
Thickness | 32mm Nominal |
System Weight | 44kg/m2 Nominal |
Panel Size | 600mm x 600mm† |
Core Material | 30mm high density particle board |
Category | Screw down |
† 600 x 900mm panels available for perimeter detailing.
Steel pedestals coated with an environmentally friendly clear passivation.
For voids ≥610mm
For voids between 25 to 610mm
Standard or Acoustic pedestal adhesives available.
This system features pre-drilled holes allowing the panels to be screwed down to the pedestals whilst still providing full access to the floor void.
Recommended for additional lateral stability in the following applications:
< 610mm void heights: clip-on stringer system
> 610mm void heights: screw-down stringer system
Point load 25 x 25mm | 4.5kN |
Uniformly Distributed Load (UDL) | 12kN/m2 |
Tested in accordance with PSA MOB PF2 PS/SPU for raised access floors.
All working loads perform to a 3x safety factor.
Structural performance based upon a full Kingspan system, i.e. panels & pedestals.
X
This system can be supplied with neoprene gaskets to minimise air loss through the raised floor surface from the underfloor plenum to aid air circulation, distribution and management.
SAFS is an approved Victorian distributor for Tate access flooring systems. We work on projects ranging from $2 000 and a few days’ work to $2 000 000 work carried out over several months.